How To Protect Your Concrete Floor From Staining?
While there are no arguments about how concrete is a tough and long-lasting material, this material is not indestructible, nor will it last forever.
It can get damaged when subjected to vigorous conditions.
Concrete floors in commercial settings are precisely more vulnerable. They are exposed to heavy traffic, moisture and extreme temperatures. Eventually, it causes it to lose its structural integrity and quality.
So, if you have a thing for redefining your driveways or exteriors with concrete, here’s how to take care of them. Read on to find some tips to protect your concrete from staining.
Concrete Sealing
It is a treatment where concrete is covered with a liquid coating called a sealant which repels moisture and resists stains. Sealants can be applied once the concrete is completely cured, which takes almost a month after placement by the manufacturer.
Concrete is porous, which can create an uneven surface. Sealing smoothens the surface of concrete and prevents liquid from draining into tiny holes. Hence it provides better resistance against staining and surface damage.
Ultimately, sealing increases the longevity of concrete floors and elongates their life span.
Cleaning Your Concrete Floors
The most important aspect of cleaning a concrete surface is to immediately clean away any spills that occur; liquids like wine or oils can quickly get absorbed and may leave a stain. Few acidic liquids like orange or lemon juice can eat away at the surface of your polished concrete flooring Melbourne.
The expert team of concrete grinding Melbourne also provides quality service in polishing and installing your concrete floors. They are the most trusted and reliable concrete grinders.
Avoid Using Chemicals On The Surface.
When it comes to protecting your concrete flooring, chemical resistant concrete sealer is the key. Since we all know concrete surfaces are susceptible to considerable damage. This is because the pores within the concrete surface often lead to serious damage through chemicals and water exposure.
Protect It With Coating
Painting or coating a concrete floor with epoxy makes it not only attractive but also helps it last longer by protecting it from nasty stains and other corrosive elements.
Steps to follow before painting the concrete surface.
- Clean the area
- Fill up all cracks
- Purchase the right paint
- Apply two coats
- Apply an etching solution
- Moisture Test
Joint Venture
Those gaps between the slabs allow room for the slab to expand and contract as weather conditions change. If those joints are not watertight, water can get under the slab, which can cause them to rise and sink. This stress can crack the slab.
To prevent this, fill the gap with a sealant that is available at any hardware store. Here is how you can do it on your own.
- Use a utility knife to remove the old felt. Also, you can use a grinder to get it all out.
- When felt is removed, use a shop vac to collect the debris in the joints.
- You can also fill the gap with a closed-cell foam backer rod, also known as filler rope.
Conclusion
Poor perimeter drainage, leaky pipes, and climate conditions can also cause damage to concrete. One of the best ways to keep your concrete from staining is the epoxy primer. In addition to this, look up to the above-stated points to have your concrete free from any damage or stains.
